AllStar Performance

Multi-Layer Driving Pants Pants are constructed of a Pyrovatex outer layer backed by a layer of flame-retardant Aramid material then lined with an additional layer of Pyrovatex flame-retardant cotton...

Multi-Layer Driving Jackets Jackets are constructed of a Pyrovatex outer layer backed by a layer of flame-retardant Aramid material then lined with an additional layer of Pyrovatex flame-retardant...

Mid-Top SFI 3.3/5 Driving Shoes Mid-top driving shoes feature a suede outer layer with a Pyrovatex flame-retardant cotton material inner liner which offers a high level of heat and flame protection...

Double-Layer SFI 3.3/5 Outseam Driving Gloves Reverse seam style gloves are created from two layers of flame-retardant Aramid material blend that features the seam located on the outer portion of the...

Series 40 Full-Face HelmetsSnell SA2025 rated full-face auto racing helmets have a classic design featuring a fiber-reinforced polymer composite shell consisting of a fiberglass and Kevlar blend to...

Radiator caps are an often-overlooked component of the cooling system that should be checked andreplaced often. Higher cooling system pressure raises the boiling point of coolant to help reduce the...

Kits contain all components to install one hub assembly including a hub seal, inner bearing, inner race, outer bearing and outer race. REM finished bearings and races feature a special polished...

Electric fans require very little amperage and are suitable for use in race car or tow vehicle. Fans are set up as “puller” units, mounted behind the radiator. By flipping blades,...

Many uses include cooling brake systems or assisting helmet cooling efforts. CFM ratings at 13.6 volts with a 3.5 amp draw. 3" Heavy Duty, 8" Long, 170 CFM

Precision lower control arms have the same appearance and function as the original factory arms but feature a precision stamping process over traditional reproduction arms providing a true bushing...

Precision lower control arms have the same appearance and function as the original factory arms but feature a precision stamping process over traditional reproduction arms providing a true bushing...

Assure correct alignment of the upper and lower ball joint when checking for bent spindles. Insert slugs into spindle and guide rod will fit through slugs if spindle isn’t bent. Kits fit most...