Spindle, Hubs, Hardware
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
1/2" CASTLE NUT THIN
Mel Hambelton Racing
$1.891/2" Castle Nut - Thick. Commonly used for 1/2" heim joints on front end.$1.89 -
3/8" DRILLED 4.0" KINGPIN
Mel Hambelton Racing
$3.38AE8473 3/8" King Pin (4.0" with Drilled Shank) Zinc Plated Grade 5 King Pin 3/8-24 Threaded End Use AE8536 Castle Nut (not included)$3.38 -
FLANGE NUT 1/4X28 LG HEAD
Mel Hambelton Racing
MSRP: $3.00$0.751/4" flanged smooth nut with a 1/2" head.MSRP: $3.00$0.75 -
FLANGE NUT 1/4X28 SMOOTH
Mel Hambelton Racing
MSRP: $2.04$0.751/4" Flanged nut, smooth (each) (non-serrated) 1/4-28 Thread This is the industry standard wheel nut with a 7/16" hex that has been utilized for over 35 years.MSRP: $2.04$0.75 -
FLANGE NUT 5/16X24 SMOOTH
Mel Hambelton Racing
MSRP: $2.40$0.755/16" Flanged nuts, smooth (each) (non-serrated)MSRP: $2.40$0.75 -
PMI LEFT HAND SHORT SPINDLE 10 DEGREE
$99.99Left Hand Spindle 10 Degree KPI 1/2" ID Bearings Installed Straight 5/8" shaft....short, for LH oval use only 1.5" Tall Barrel Fits OEM Slack brand karts, but is a great universal spindle.$99.99 -
PMI RIGHT HAND SPINDLE - STEPPED 10 DEGREE
$99.99Right Hand Spindle 10 Degree KPI 1/2" ID Bearings Installed Stepped Shaft 3/4" Inside with 5/8" outer stub 1.5" Tall Barrel Fits OEM Slack brand karts, but is a great universal spindle.$99.99 -
$0.30 -
$0.30 -
$1.50 -
Ultralight Right Front Stepped Hub (1/4" Hardware Only)
$31.99Ultralight Right Front Stepped Hub (1/4" Hardware Only) 3/4" Inner Bearing and 5/8" Outer Bearing Accepts ONLY 1/4" Hardware Standard Studs and Serrated Nuts Included$31.99 -
UltraLite 5/8" Front Hub (1/4" Hardware Only)
$39.99UltraLite Front Hub Rubber Sealed 5/8" ID Bearings on both sides Single Pattern accepts only 1/4-28 Hardware 1/4" Hardware Included Standard 1/4" Bolts and Serrated Flange Nuts (3 each)...$39.99