Keep unwanted dirt and dust out of your fuel pump when it is on the shelf. Whether it's your spare in the trailer or your primary in the offseason, keep it in proper working condition with our NEW fuel pump cover!

This is our weld on screw jack mount for 1"-8 thread screw jacks. Mount has three threaded holes that are 2-1/2" center to center. 

These are our 5/8'' bent suspension tubes for clearance for the suspension cage. Tubes are machined from 4140 billet steel tube for improved strength. Tubes have 13/16" hex on each end.

Adjustments made easy! Grab your 1-1/4" wrench and turn the tube clamp to adjust your suspension tubes. Designed for use with our WM450 Suspension Tube Jam Nuts.Sold seperately is our WM450W Stubby 1-1/4" wrench.

This new bolt in 5" OD grab Raised cup moves the spring table up 1" from our WM404SC cup.  The OD grab spring cup centers the spring on the outside diameter to keep the spring in line better than a standard cup. This cup works...

This new bolt in 5" OD grab Drop cup moves the spring table down 1" from our WM404SC cup.  The OD grab spring cup centers the spring on the outside diameter to keep the spring in line better than a standard cup. This...

Install/remove your cage bearings with ease with our all new bearing tool! Use a hammer to tap the handle while the tool does the work. Comes with handle, punch, and ring.

Cleaning kit for slider maintanence. Comes with tools, brushes, and grease; all organized in a custom-cut foam insert for your tool box drawer. Does NOT come with bushing or piston. Bushing and piston are sold separate and are included in the...

This is the open insert with max power for our 1" tall body.

Our Jimmy Mars designed traction tuning carb spacer system allows you to reduce power by changing the insert when the track gets slick. This is our 2" tall Angled main body. Spacer is angled 4 degrees left and 4 degrees back.  Inserts sold...

Set your axle on and roll to check straightness. We also have a slot on the bottom to mark a straight line on new axles with a sharpie to keep an eye on axle twist.

This is our suspension component measuring plate. Utilizing our heim center finder base design, we have made a sturdy 2-1/2'' wide plate with the center to center distance machine on it for quick reference. The plate fits 1/2'',...