Spindles and Accessories

Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamers may be used in a drill with a 1/2" chuck by removing the T-handle.ALL11170.........Large Diameter 1", Small Diameter 7/16"7.15°, 1-1/2" Taper Per FootALL11172...........

Pickle forks suck! Our remover actually works. With the nut off the lower ball joint, simply place the remover between ball joint tips, apply pressure, tap the spindle, and the ball joint pops out.  You then flip tool over and add the extension to...

Spindle Saver, IMCA Approved, Steel, Cadmium, GM Metric Spindles, Kit

Spindle, Stock Pin Height, Forged Steel, Black Paint, GM G-Body, Sold Each

Spindle, Stock Pin Height, IMCA Approved, Forged Steel, Black Paint, Ford Mustang II

Spindle Hardware, 5/8-18 in Thread, 1/2-13 in Thread, One 1 in Long Allen Head Bolt, Two 3 in Long Hex Head Bolt, Steel, Natural, Allstar 3 Piece Spindles, Kit

Brake Caliper Bracket, Front, Bolt-On, Steel, GM Metric Caliper, Allstar Mustang ll / GM Metric Spindle, Each

Steering Arm, Steel, Natural, GM Metric Spindles, Each

Modular design 3-piece Mustang II style spindle features a separate spindle body with bolt-on caliper bracket and steering arm for easy and affordable repairs. Spindle uses a GM metric brake rotor, bearings and brake caliper while combining the features...

Steering Arm, Steel, Natural, Mustang II Spindles, Each

Assure correct alignment of the upper and lower ball joint when checking for bent spindles. Insert slugs into spindle and guide rod will fit through slugs if spindle isn’t bent. Kits fit most aftermarket race and GM stock Metric spindles. Guide Rod...

Spindle Nut, Washer / Cotter Pin