Shocks and Springs

Steel Rod End Made for all 7/16 – 20 piston rods Made in Coopersville, Michigan Sold as each 1" Extension

1/2″  bump stops with a 5/8″ hole Available in (5) durometers / colors Green, 50 durometer Orange, 55 durometer Purple, 60 durometer Yellow, 75 durometer

Coil-Over Spring Spacer Made out of aluminum Anodized black ID: 2-5/16″ OD of Connector: 2-1/2″ OD with Lip: 3-3/8″

Steel Rod End Made for all 7/16 – 20 piston rods Made in Coopersville, Michigan Sold as each 2" Extension

Made from micro-cellular Polyurethane material Material and design offer a smooth progressive spring rate Maintains rate even under severe conditions (Retains 95% of original rate at 180 F) Available in 2 different sizes Available for coil-overs...

3/4″  bump stops with a 5/8″ hole Available in (5) durometers / colors Brown, 45 durometer Green, 50 durometer Orange, 55 durometer Purple, 60 durometer Yellow, 75 durometer

STANDARD CONVENTIONAL SPRINGSDEVELOPED SPECIFICALLY FOR ROUND TRACK RACING. DESIGNED TO HAVE THE OPTIMAL SPRING RATE SWEET SPOT WHERE THE SPRING IS USED ON ACTUAL VEHICLE. As you might know, United States are the largest racer populated country in the...

STANDARD CONVENTIONAL SPRINGSDEVELOPED SPECIFICALLY FOR ROUND TRACK RACING. DESIGNED TO HAVE THE OPTIMAL SPRING RATE SWEET SPOT WHERE THE SPRING IS USED ON ACTUAL VEHICLE. As you might know, United States are the largest racer populated country in the...

Liquid filled inflation unit No case, no swivel mount 0-300 PSI

aluminum .260 thick 2″ OD 5/8″ hole

Aluminum .260 thick 2-1/4″ OD .750 hole size

Centered flange slider for Integra