Shocks and Springs

Steel Rod End Made for all 7/16 – 20 piston rods Made in Coopersville, Michigan Sold as each 1" Extension

1/2″  bump stops with a 5/8″ hole Available in (5) durometers / colors Green, 50 durometer Orange, 55 durometer Purple, 60 durometer Yellow, 75 durometer

Coil-Over Spring Spacer Made out of aluminum Anodized black ID: 2-5/16″ OD of Connector: 2-1/2″ OD with Lip: 3-3/8″

Steel Rod End Made for all 7/16 – 20 piston rods Made in Coopersville, Michigan Sold as each 2" Extension

Made from micro-cellular Polyurethane material Material and design offer a smooth progressive spring rate Maintains rate even under severe conditions (Retains 95% of original rate at 180 F) Available in 2 different sizes Available for coil-overs...

3/4″  bump stops with a 5/8″ hole Available in (5) durometers / colors Brown, 45 durometer Green, 50 durometer Orange, 55 durometer Purple, 60 durometer Yellow, 75 durometer

Polyurethane bump stop is weather resistant and easily adjustable by adding packers to the inner ring. Five 1/16” thick packer shims included in the kit.

Uniquely designed shock shims are placed directly onto the shock shaft to simplify fine tuning of the chassis without disassembling the shock or even removing the shock from the chassis

Liquid filled inflation unit No case, no swivel mount 0-300 PSI

aluminum .260 thick 2″ OD 5/8″ hole

Aluminum .260 thick 2-1/4″ OD .750 hole size

Centered flange slider for Integra