Rebuild kit for our spring sliders. Includes new style bushing, piston, snap ring, o-ring, and nyloc nut.

This spring alignment plate works with soft rate springs using the 5" OD to align the spring instead of the ID on our coil over spring sliders and our WM285D drop bearing RF spring cup.  You can also run WM165BO on one end of...

Our standard slider cups now capture the OD of the spring to keep it more linear through travel. This is the removable side cup.

Replacement shaft for WM251 24" extended slider. Overall length is 12-3/4" and shaft portion is 9-3/4".

Lots of trickery in our spring sliders. The smoothest and most stable slider on the market. We use a linear DU bushing on a hardened shaft, along with a shaft stabilizing internal piston. No need to unscrew the nut to remove the spring. The spring cup...

Spring pin for lock for WM251

Clamp For Limit Chain  Available in 1.25", 1.5" and 1.75" tube sizes

Double adjuster style limit chain frame mount. Chain and axle clamp Available for 1.25" and 1.5" Tube

Fits 1.5" square tube. One slot on centerline of tube and one slot inboard. Mount has 4-1/2'' total adjustment. Works with climber on arc to keep car tracking lined up. Climber hardware included.

Steel chain holder with bearing. This keeps the chain bind free through the range of motion

A Wehrs original concept in pinion mounts to save you some money. This pinion mount is built with 2 identical sides so in the case of an accident you can unbolt the mount, flip it 180 degrees and you have another good side instead of having to buy 2...

Same arc as our WM205 with the extra arc slot on left side of the pinion. Mount adjusts easily with our climber nut. All hardware included.