Front Suspension and Steering

Repair or enlarge tapered holes to accept tie rod ends or ball joints. Reamers may be used in a drill with a 1/2" chuck by removing the T-handle.ALL11170.........Large Diameter 1", Small Diameter 7/16"7.15°, 1-1/2" Taper Per FootALL11172...........

Aluminum Can. 8" total height, 3" can diameter. -10AN Bottom port. -6AN Side return.  Includes aluminum mounting bracket.  3lbs total weight. 

The Pacer spindle is a modular design which allows the spindle to interchange from left to right by flipping the steering arm. Spindle features a 7° pin inclination and 1-1/2" per foot upper ball joint taper. Spindle also uses the same spindle pin as...

Caliper bracket for GM Metric caliper. Fits ALL55960 ALL55961

NEW fabricated RF chevelle lower for the USRA B-mod has a spring helix and uses a standard large Chrysler screw-in ball joint (not included). This lower comes with a WM200-8 bolt-on shock mount and is powder coated black.

Fits ball joint housings that use a 1.437" ball on the stud, including:22300, 22301, 22302, 22303, 22304, 22306, 22307, 22314, 22320, 22406, 22407, 22412SB, 22416, 22418, 22420, 22421, 22423, 22424, 22425, 22429

BALL JOINT PRECISION LOWER CHRYSLER STYLE +.500 - FITS K727 Replacement Studs

BALL JOINT PRECISION LOWER CHRYSLER STYLE WITH STEEL CAP +.500 - FITS K727 Replacement Studs

BALL JOINT PRECISION LOWER CHRYSLER STYLE - FITS K727 Replacement Studs

BALL JOINT, 22412 W/STL CAP Replacement Studs

Pickle forks suck! Our remover actually works. With the nut off the lower ball joint, simply place the remover between ball joint tips, apply pressure, tap the spindle, and the ball joint pops out.  You then flip tool over and add the extension to...