Fuel System

Incorporates the same attributes of the standard 4 Hole Tapered spacer, but additionally, this spacer incorporates a compound angle mounting surface which angles the carburetor down in the front and down to the driver side for applications such as Dirt...

20 Tooth HTD Pulley used on Small Block Chevy mandrel drive kits (KSD1025 & KSD1039). Drive: 1.00" ID with 1/8" keyway. Construction: Aluminum with hardcoat anodized finish. 

0-200 PSI 5V pressure sensor 0.5V to 4.5V Heavy duty Stainless steel body 1/8" NPT thread Includes GT150 packard connector, pins, and grommets. (Pre-wired cable sold separately) Compatible with all EFI and data logging systems.  Typical uses;...

AED Performance 2BBL rebuild kits are designed specifically for 2BBL applications.This kit is made up of the finest components available today and includes everything you will need to do the job right.350-500 rebuild kits feature: * Reusable...

LDM899TP combo sensor.   Perfect for converter pressure/temp.  outputs 0.5V to 4.5V signal for PSI.  0 to 300 psi  and 0-500*F in one sensor! 1/8" NPT 8.5 feet flying lead.  (Enough extra wire to cut and add connector...

4 bar map sensor. (-1 bar to +3bar) -14.7 PSI to + 43.5 PSI Absolute pressure sensor -14.7 PSI = 0.5 Volts,   0 PSI = 1.46 Volts, 43.5 PSI = 4.5 Volts Outputs 0.5V to 4.5V Input 5V Accuracy 0.5% of full scale.  Heavy duty Stainless steel...

Carburetor Base Plate Gasket, 4-Barrel, 4 Hole

40 Tooth HTD Pulley fits all belt driven KSE Tandem and TandemX Pumps. Drive: 5/8" ID with 3/16" keyway. Construction: Hardcoat anodized, billet aluminum. Includes: Pulley, 3/16" straight key, and set screws. Typical front drive or rear bell housing...

40 tooth pulley / belt guide set for KSE 40 tooth pulley (KSD1019). Billet aluminum construction. Includes: front guide, rear guide, and mounting screws. Compatible with all belt driven KSE Tandem & TandemX Pumps.

Eliminates Cutting, Drilling & Modifications When Installing Nitrous on a Late model Fuel Injected Vehicle. Simply disconnect the OE Fuel Hose and Install this Adapter Between the OE Fuel Rail and Fuel Hose. The (3) 1/8" NPT Ports Can Be Configured...

5/16"-24 hall effect speed sensor.   Triggered by magnets (Not ferrous material) 5/16"x24 body Built in LED light for easy setup Nickel plated Detection range 0.1MM to 10MM Flush mount Supply voltage 10V-30V Short circuited/reverse protection built...

5/16"-24 hall effect speed sensor.   Triggered by ferrous material (Not magnets) 5/16"x24 body Built in LED light for easy setup Stainless steel body Detection range 0.1MM to 1MM (0.004" to 0.04") Flush mount Supply voltage 10V-30V Short...