Miscellaneous Tools

Molding lead made easy! The NEW Clamp-On Lead Mold Kit comes with 1-1/4", 1-1/2", and 1-3/4" rods for various tubing sizes. The mold makes a 25-lb clamp-on style lead. Everything you need to add weight to your race car!

Deburring Tool, Blades / Blade Holder / Telescopic Handle, Kit

Engine Lift Plate, 3/16 in Thick, Steel, Zinc Oxide, Spread / Square Bore Carburetor Flange, Each

Grease Gun Tip, 2 in Long, 1/8 in NPT Female, Steel, Zinc Oxide, Each

Heavy-Duty mechanism max torque of 797 ft-lb for a max speed of up to 2400/1900/1500 RPMs Forward/Reverse button and equipped with a 3-speed selector switch for optimal control Cordless - 21V lithium-ion battery-operated (Battery...

Instant response, non-contact temps Back lights for night use ºF or ºC Laser sighting for accuracy Holds readings longer for easier use Measures to 600ºF

Punch Mandrel, Steel, Natural, Allstar Hammer Type Spring Steel Punches, Each

This tool helps you set your radius rod lengths to the exact measurement you need. 

Spring Steel Punch, Screw Type, 1/4 in Diameter Hole, Steel, Natural, 1 in Wide Spring Steel, Each

Assure correct alignment of the upper and lower ball joint when checking for bent spindles. Insert slugs into spindle and guide rod will fit through slugs if spindle isn’t bent. Kits fit most aftermarket race and GM stock Metric spindles. Guide Rod...