Shocks and Springs

Integra Take-Up Spring Length: 6 in. Spring Rate: 5 lbs. Outside Diameter: 2 1/2 in.

Offset flange slider for Integra

Aluminum Rod Guide for Steel Shock

Roller skate bump stops with  a 5/8″ hole. Available in (5) durometers / colors Black, 50 durometer Purple, 60 durometer Green, 70 durometer Yellow, 80 durometer Red, 85 durometer

This is a shaft extension – not a rod end extension.  7/16 – 20 thread

1.75 OD. x .562 ID x .125 THICK

Check compression and rebound travel of coil-over shocks at a glance. Clamp aluminum bracket portion of the kit directly to the coil-over sleeve or shock body and attach the other end to the existing shock eye bolt or under spring cup. May be used with...

Std. stack nut for Integra

10" x 2.5" ID Barrel type coil over springs

10" LENGTH - 2.5"ID Progressive Type

STANDARD CONVENTIONAL SPRINGSDEVELOPED SPECIFICALLY FOR ROUND TRACK RACING. DESIGNED TO HAVE THE OPTIMAL SPRING RATE SWEET SPOT WHERE THE SPRING IS USED ON ACTUAL VEHICLE. As you might know, United States are the largest racer populated country in the...

12" x 2.5" ID Barrel type coil over spring