Wehr Machine Racing Products

This is the replacement tube ONLY for our RF tie rod with a LH stock inner. Tube is made like our 5/8" suspension tubes with 13/16" hex on each end. Approximately 15" long and is lasered with...

This is our complete RF tubular tie rod with LH rod end inner (18-3/4" - 20"). Tube has a 13/16" hex on each end like our 5/8" suspension tubes. Tie rod assembly comes with greasable heims with...

teel clamp-on pull bar bracket for 1-1/2" square tube. Holes are on an arc to keep pinion angle right when adjusting.Comes with 5/8" bolt and spacers to reduce 3/4" heim to bolt.

1/2"-20 thread 20" long strut tube to support lift bar.Comes with LH and RH 1/2" heim.

Clamps to 3'' rear end tube to run support strut to the lift bar for lateral support.

Our climber gear works on all Wehrs frame mounts and pinion mounts.

Fits any wide 5 hub except Volkswagen wide 5 pattern. Fine tune your track width to the max.

Our rear end drain pan makes changing gears a dream. It is wider to catch all the fluid, has a spot for each gear to drain, a spot to stand the rear cover up to drain, a spot for...

Make quick adjustments on your coil over with our spring packers. One packer is equivalent to one turn on your coil over assembly. These packers are easy to use and save time when making adjustments...

Make quick adjustments on your coil over with our spring packers. One packer is equivalent to one turn on your coil over assembly. These packers are easy to use and save time when making adjustments...

Clip for spring cup for all Wehrs spring sliders.

Ultra Force load rating machines are built with CNC machined components giving our machines unsurpassed strength and quality. All manual machines will feature an Automatic Move to Start...