Wehrs Machine and Racing Products

This new bolt in 5" OD grab Drop cup moves the spring table down 1" from our WM404SC cup.  The OD grab spring cup centers the spring on the outside diameter to...

Install/remove your cage bearings with ease with our all new bearing tool! Use a hammer to tap the handle while the tool does the work. Comes with handle, punch, and ring.

Cleaning kit for slider maintanence. Comes with tools, brushes, and grease; all organized in a custom-cut foam insert for your tool box drawer. Does NOT come with bushing or piston. Bushing and...

1" Tall bore reduction inserts for WM301B and WM301AB

Our Jimmy Mars designed traction tuning carb spacer system allows you to reduce power by changing the insert when the track gets slick. This is our 1″ tall main body. Inserts sold individually.

Our Jimmy Mars designed traction tuning carb spacer system allows you to reduce power by changing the insert when the track gets slick. This is our 2" tall Angled main body. Spacer is angled 4...

Set your axle on and roll to check straightness. We also have a slot on the bottom to mark a straight line on new axles with a sharpie to keep an eye on axle twist.

This is our suspension component measuring plate. Utilizing our heim center finder base design, we have made a sturdy 2-1/2'' wide plate with the center to center distance machine on it for...

Crate motor dip stick used for checking oil levels inside the oil pan.

Blank dip stick for open/crate motor. Allows you to mark your own oil level line depending on preferences.

Dip stick used for check fluid levels in your transmission.

Our T-Bar adjuster makes it easy to adjust the rear deck to your desired height. Adjusters fit 3/4'' square 16ga wall tube secured with a side bolt or can be welded into the tube. 3-1/2'' adjustment...